LOW-E (SYNERGY)

Housing in small and medium-sized preferred in commercial buildings

Sisecam Low-E glass, heat control feature provides users with comfortable living areas.

used in commercial buildings with solar control glass.

Şişecam Low-E glass is float glass şişecam the heat control glass.

• Temperature control and energy savings.
• Reduce fuel costs.
• Transparency and will not budge from natural daylight.
• Fog delays that occur on the glass surface.
• It provides the maximum benefit from the sun’s heat.
• It prevents the winter cold front window.
• causes discoloration of the articles and fabrics with ultraviolet (UV) radiation reduces the permeability of 76%.
• Compared to ordinary double glazing, Sisecam produced using Low-E Glass Insulating Glass’ll spend for S, 1-2 years you will return in the winter allows you to save fuel.
• Low-E coating is made on laminated glass meets the safety and security needs.

PRODUCT DESCRIPTION

Şişecam Low-E glass is float glass şişecam the heat control glass.
Insulating Glass Manufacturers Authorized (II) by Sisecam Low-E glass produced using double glass units,
is offered to the market with the S Series Insulating Glass Systems brand.
Low-E glass made by şişecam Insulating Glass Systems S Series, 77% heat losses compared to single glass decreases 50% compared to ordinary double glazing and saves heating costs.

Şişecam Low-E glass, flat glass in a vacuum by electron scattering method on a thin metal / metal oxide layer obtained by applying the off-line coating is glass

 

“Daylight” and “Solar Energy” values, using spectral data measured in the laboratory according to EN 410 standard, “TNO Science and Industry” – is calculated at 3:01 WISE software package.

The value of the thermal conductivity coefficient was calculated according to standard EN 673 with WIS 3.01. emissivity values ​​used in the calculation of the value measured in vitro EN 673 (Appendix A) and EN 12898 “was measured according to.

exposure to solar radiation throughout the surface of the glass piece, the temperature differences between day and night, because of factors such as heat absorption coefficients of the glass of the sexes may arise or chopping risk of thermal breakage. Depending on these factors require the use of tempered or partially tempered glass. This document does not have any calculation for thermal breakage risks. For questions regarding this matter please contact Sisecam Flat Glass.

This document is for informational purposes only and the information contained Trakya Cam without any warning Inc. It changed by.

In this document the differences between the actual value depending on the conditions of the place of use with a given value may occur. Because of these differences, Trakya Cam Sanayii A.Ş. in no way be held responsible.

Daylight Permeability is the percentage of the light from the window glass.

Daylight Mirror (external): The percentage of incoming light reflected back by the window glass.

Total Solar Energy Transmission: The total percentage of incoming solar energy is coming on the glass. Lower total solar energy transmittance value, the better the solar control.

Shading Coefficient: Solar energy is compared to the total permeability of 3 mm colorless. The lower shading coefficient means better solar control.

Thermal Conductivity : a measure of thermal insulation in windows. The lower the value, the better the thermal insulation, heating costs and less means more winter comfort.